Warning
18


Warning!

Please, get older and come back soon!

You need to be at least 18 years old to enter this site.


We consider if we need to make more of these items and how many. Please, fill this form so that we know about the demand. We will notify you when the product is available:
Name
Number of items to reserve (less than 1 is ok, e.g. set 0.3 if there is a 30% chance)
E-mail

Send Close

We consider if we need to make more of these items and how many. Please, fill this form so that we know about the demand. We will notify you when the product is available:
Name
Number of items to reserve (less than 1 is ok, e.g. set 0.3 if there is a 30% chance)
E-mail Send Close

ProYStick

Product Code: ProYStick
Availability: Out Of Stock; please subscribe
Price: $235.00
Qty:  
   - OR -   
ProYStick is the only mod in stick form factor based on SX350J chip. We are using V2 version.
It's so small that you can hide it in your hand and use it as a pocket mod. 
It's handy for both right-handed and left-handed.
ProYStick has a satined aluminium body with black anodized finish having hardness of 60 according to the Rockwell scale.
It's fully liquid proof, so a leaking atty cannot damage it. 
The connector has a spring. The button is made of stainless steel.
There is a logo, but no serial number.  
 
Features:
SX350J V2
26650 battery (not included, Blue Efest 3000mah IMRs fit fine)
USB charger
Fully liquid proof
Connector has a spring
 
Dimensions:
Height: 83 mm
Width: 59 mm
Atty hole: diameter - 23.5mm, depth - max. 35 mm
Bottom size: 33-42 mm x 59 mm
Battery compartment: 65mm
Weight: 150 gr
 
Other parameters:
Atomizer connector: 510 made of SS 303 with brass pin
Battery compartment cap is made of SS 202.
 
Merkava is a recommended atty for the ProYStick. You can buy them as a kit.
Alternatives include any 510 atomizer 23 mm in diameter or less.
See also a YStick mod which is deigned for 18650 battery.
 

Related Products (8)

Don on 20/06/2016
2 reviews


This thing is awesome! The finish on mine is perfect, and it works great with my green Efest 26650 batteries. I have a Squape-R on it right now- this atty is so tall that it looked silly on my other mods. It also made them so top-heavy that they were far too likely to tip over. It's great on here, though- it sticks up just far enough that the triangle windows are above the edge of the mod body. I'm also using your drip tip on it- this combo looks fantastic! I really like the ergonomics, too. Never thought a 26650 mod could be this comfortable to hold. Spectacular work- thanks!!

Administrator: Thank you for review, Don!
Fin on 16/05/2016
2 reviews


When I received the proYstick there was a couple of dents in anodizing, scratch and 510 connector was faulty due to incorrect tool with which it was attached. Mini-ecig recommended to cover them with permanent marker..... Yes, they promised to send me a new 510 connector which is a good thing. Battery cap can not be closed properly, i use Efest green 28650 battery, and it is quite a short battery. ProYstick has worked well with the exception of these nasty errors. Compared to a xvostick a lot bigger so the very small hand may be too large. Good battery life. A great chip. Comes with a tube so that you can also use the 18650 battery. Works on both, left and right hand. I recommend, without any mistakes, though.

Administrator: Thank you for review. ProYStick's battery compartment depth is 65mm. You can use any 26650 battery of that length. It should be a battery without protection. Actually, 65.5 mm battery also fits well. Some batteries are 1-2 mm longer. You can use them as well but the battery cap will not screw down evenly to the mod body level.

Write a review

Your Name:*



Pros:
Cons:
Comment:*
Add photo:
Link on photo:
Enter the code:




We accept:

Latest News

InsideOut is our new atty and it's in stock

InsideOut is a new rebuildable atomizer and it's in stock! "Another tank" you might think, but you're right for a half only. Yes, it's a tank, but not yet another one. It's something compl ..
Full Article

Posted: 08/08/2016

ProYSticks are back from anodizing

The first batch of ProYSticks is back from anodizing.    Place an order for your YSticks or ProYSticks today. ..
Full Article

Posted: 08/04/2016

YStick: video review from Chels

Chels finished assembling of the first sample of the YStick and prepared a review. He shows it in use: in both right and left hands, different grips. You'll see the connector, the buttons with ..
Full Article

Posted: 31/03/2016
View All News