Warning
18


Warning!

Please, get older and come back soon!

You need to be at least 18 years old to enter this site.

Subscribe for stock updates
Fill this form to be informed when this product arrives:
Name
Number of items to reserve (less than 1 is ok, e.g. set 0.3 if there is a 30% chance)
E-mail

Send Close
Subscribe for stock updates
Fill this form to be informed when this product arrives:
Name
Number of items to reserve (less than 1 is ok, e.g. set 0.3 if there is a 30% chance)
E-mail Send Close

MiniGen SS (shipping in 2-14 days)

Brand: Chels
Product Code: MiniGen SS
Availability: Out of stock; subscribe for upd.
Price: $70.00
Qty:  
   - OR -   

MiniGen SS is a genesis atomizer made from SS 316.

It is designed to be ideal with MicroStick but it can be used as eGo-sized atomizer.

 
Dimensions:
  • diameter - 14.8 mm
  • height - 45 mm
  • weight - 27 gr
  • capacity - approximately 2.3 ml
  • air hole - 1.1 mm
  • wick hole - 2.4 mm

Other parameters:

  • screws M2, length 4-6mm
  • nuts on the central post M2

Reviews:

Review by The Hill Giant: here

Review by Colombo (Italian): here

Instructions:

Assemby & disassembly for V1: here

Assemby & disassembly for V2: here

Video from production:

Part 1: here

Part 2: here

To refill the MiniGen:

  1. Unscrew the top cap, then you will see 2 screws
  2. Unscrew the screw which doesn't hold the heating wire
  3. Now you have an access to the tank.

Note: on the photos MiniGen is often presented with battery mods, drips, batteries, other atomizers, etc for better visibility, but these items are not included in the price.

Related Products (5)

scintalate on 06/01/2014
2 reviews


Just wanted to pop buy and say I love my microstick and minigen. Despite the small size, the good choice of centre post nuts and hole spacing make this gen relatively easy to wick. I didnt get any hotspots on the first attempt at putting some SS mesh in and the vapor production is excellent. Ive not had any leaking problems when carrying in my coat pocket and dont expect to with the quality design. One thing to watch out for with the minigen is that the filling screw must be fully tightened so its snug against the delrin washer or you get a short against the centre post. It might be improved with a smaller headed screw. I havent wanted to use any other vaping kit since it turned up.
PLEASE on 21/12/2013
2 reviews


Please don't put those big ugly logos on the atomizer! Please! It could be such a nice looking little thing without them. :)

Write a review

Your Name:*



Pros:
Cons:
Comment:*
Add photo:
Link on photo:
Enter the code:




We accept:

Latest News

Retailers

Now we finally have the first retailer! Only retailers which have our items in stock are published here: http://mini-ecig.com/retailers   In this run there will be 3 more retai ..
Full Article

Posted: 12/02/2014

List of retailers will be published on the next week

The list of retailers will be published on the next week. We promised to publish it on this week, but due to the defective screws we had to double check the remaining MicroSticks. All the M ..
Full Article

Posted: 08/02/2014

Known problems of the 3rd run & shipping news

Let's start with known problems of the current run.   The screw head easily gets stripped and it's impossible to remove the screw from the bottom cap (3rd run only: #800+) &n ..
Full Article

Posted: 07/02/2014
View All News